ARCHIVES

The viewpoints are 3 ft. level and 1.5 ft. in width and 1.5 ft. length. The two rollers and three edges are used to dispose of the juice from orange. A DC motors are used to drive the roller and sharp edges and IR sensor sense the coin which we implant in the coin expansion box. The sharp edges are used for the cutting justification for orange. The two DC motors are used for turning the edges and roller. In this machine doesn't anticipated that some other stuff should pressing movement, for extraction of crushed orange. Two edges are fitted agreed with each other and one edge underneath the equivalent sharp edge, due to this pressing movement can achieve capably. The ability of roller in this machine it can isolate juice from small amounts of orange which squash by edges. The normally worked mechanical unit includes several motors, moves, roller and bleeding edges. The stuff bundling was assembled using 2mm thickness of delicate steel sheet. The electronic parts include the control unit, sensor and moves. The 3 motors are attached with L293D motor driver IC which is obliged by 8051 microcontroller. The sensor is used for the noticing the PH of juice.