Industrial Chemistry Research Journal | IJSREAT

Industrial Chemistry Research Journal – Research and Publication at IJSREAT

Industrial chemistry applies chemical science to the development, production, testing, and improvement of materials and products used in manufacturing and industry. Research in this field covers chemical processes, catalysts, polymers, process optimization, product quality, sustainable production, and industrial waste management.

The International Journal of Scientific Research in Engineering & Technology (IJSREAT), e-ISSN 2583-1240, describes itself as an international, peer-reviewed, open-access, multidisciplinary journal covering science, engineering, and technology. Researchers seeking an industrial chemistry research journal can review its stated chemistry and related subject coverage to determine whether their manuscript is suitable.

🏭 What Is Industrial Chemistry?

Industrial chemistry connects chemical principles with practical manufacturing requirements. It examines how raw materials are transformed into useful products, how chemical reactions can be controlled and scaled, and how product performance and process consistency can be evaluated.

Industrial chemistry research may involve laboratory experiments, pilot-scale investigations, analytical testing, process modelling, and assessment of resource use. Studies can also address safer chemical handling, pollution prevention, energy efficiency, and the responsible use of raw materials.

🧪 Major Research Areas in Industrial Chemistry

• Chemical Process Development: Design and evaluation of reaction conditions, process steps, and production methods.
• Industrial Catalysis: Development and characterization of catalysts for chemical manufacturing and improved reaction performance.
• Process Optimization: Investigation of temperature, pressure, concentration, reaction time, and other operating parameters.
• Polymer and Plastics Chemistry: Polymer synthesis, additives, composites, recycling, and material performance.
• Materials Chemistry: Preparation and evaluation of functional materials, coatings, ceramics, and nanomaterials.
• Analytical Quality Control: Chemical testing, spectroscopy, chromatography, and validation of analytical methods.
• Green Industrial Chemistry: Waste reduction, safer reagents, solvent recovery, renewable feedstocks, and resource efficiency.
• Industrial Electrochemistry: Electrochemical production, corrosion studies, surface treatment, and energy-related processes.
• Environmental Process Management: Treatment of industrial wastewater, emission monitoring, and chemical waste management.
• Computational and Data-Driven Chemistry: Process simulation, chemical modelling, statistical analysis, and data-supported process evaluation.

🔬 Industrial Chemistry Research Topics for Journal Papers

The following examples connect industrial chemistry with science, engineering, and technology. Authors should develop a specific research question and support conclusions with appropriate experimental or computational evidence.

• Optimization of reaction conditions for a selected industrial chemical process.
• Synthesis and characterization of catalysts for industrial applications.
• Evaluation of solvent recovery methods in chemical processing.
• Development of biodegradable polymer composites for selected industrial uses.
• Analysis of corrosion behaviour in materials used in chemical processing equipment.
• Characterization of industrial by-products for potential material applications.
• Investigation of adsorption methods for removing selected contaminants from industrial wastewater.
• Development of chemical sensors for process monitoring and quality control.
• Comparative evaluation of conventional and alternative synthesis routes.
• Study of energy use and material efficiency in a laboratory-scale chemical process.
• Preparation and testing of functional coatings for industrial environments.
• Computational modelling of reaction pathways or process parameters.

💻 Industrial Chemistry and Computer Science

Computer science and data-analysis techniques can complement industrial chemistry research. Process data can be examined using statistical methods, simulation tools, or machine-learning approaches to identify patterns and evaluate operating conditions.

Examples include computational chemistry for studying molecular interactions, digital monitoring of process measurements, predictive analysis of product properties, and modelling of reaction conditions. Manuscripts using computational methods should identify the software, data sources, model assumptions, validation procedures, and limitations.

📘 About IJSREAT – International Journal of Scientific Research in Engineering & Technology

The International Journal of Scientific Research in Engineering & Technology (IJSREAT), e-ISSN 2583-1240, describes itself as a bi-monthly, international, peer-reviewed, open-access, multidisciplinary online journal dedicated to research in science, engineering, and technology.

According to the journal information supplied, IJSREAT was established by academicians, educationists, engineers, and industry professionals to provide a platform for original research, technological innovation, and scientific advancement. Its stated scope includes chemistry, applied chemistry, materials science, environmental engineering, and related disciplines.

IJSREAT indicates that it welcomes original research papers, review articles, and technical notes. Authors should confirm that their industrial chemistry manuscript aligns with the journal’s current scope and follow the latest author instructions before submitting.

🌍 Open Access and Peer Review

IJSREAT describes its publication model as open access, with published articles intended to be available online without a subscription charge to readers. The journal also states that peer review and plagiarism screening are part of its editorial process.

The supplied journal information lists an initial acknowledgment target of 12 hours, expert review within 2 days, and a decision target within 3 days. These are journal-stated timelines, not guarantees of acceptance or publication by a specific date. Actual timing may depend on manuscript suitability, reviewer availability, revision requirements, and editorial decisions.

Authors should consult the journal’s current publication ethics guidance and verify any stated compliance or review procedures directly with the journal.

🔎 Indexing and Google Scholar Discoverability

IJSREAT lists the following platforms and services in its supplied indexing and abstracting information:

• Google Scholar
• Scribd and ISSUU
• Elsevier Mendeley
• EuroPub and DRJI
• Academic Keys and Edocr
• I2OR, PDFSR, and ResearchBIB
• SSRN and WorldCat
• Ex Libris, Thomson Reuters Research ID, and Semantic Scholar
• Dimensions and PlumX

Authors should verify current indexing or listing status directly with the relevant services. Google Scholar discoverability is not equivalent to UGC CARE listing or approval. Researchers who require a particular indexing status should check current official UGC information using the journal’s exact title and ISSN.

⚡ Fast Publication and Rapid Publication Information

Researchers searching for fast publication or rapid publication should compare stated editorial timelines with the journal’s peer-review procedures, publication ethics, subject scope, and fee details. A short review target does not guarantee acceptance or immediate publication.

Before submitting, check whether the journal provides clear information about reviewer evaluation, revision requirements, publication charges, article access, and correction or withdrawal procedures. These factors can help authors assess whether a publication venue meets their academic or institutional requirements.

💰 Article Processing Charges

According to the fee information supplied by IJSREAT, article processing charges apply after manuscript acceptance. The stated charges for case reports, original articles, and review articles are listed below. Authors should confirm current fees, applicable taxes, DOI arrangements, and payment instructions directly with the journal before making payment.

Researchers searching for a low cost industrial chemistry research journal should compare total charges, applicable taxes, DOI options, editorial procedures, subject scope, and the services included. A fee by itself does not establish the quality or suitability of a journal.

📝 IJSREAT Publication Process

IJSREAT describes an online submission workflow through its editorial management system. The process provided by the journal is summarized below:

1. Submit Online: Upload the manuscript through the editorial management system, described by the journal as available 24/7.
2. Initial Response: The journal states that acknowledgment is targeted within 12 hours.
3. Expert Review: The supplied process lists a review target of 2 days.
4. Decision Notification: The journal states that an acceptance or rejection decision is targeted within 3 days.
5. Publication and Certificate: After acceptance and completion of required steps, the journal describes PDF access and a digital certificate.

These are journal-stated targets rather than guaranteed timelines. Review duration may vary according to the manuscript, reviewer availability, editorial assessment, and any required revisions.

🖥️ Editorial Management System

IJSREAT describes its editorial management system as providing features to support authors during submission and publication:

• Author Dashboard: Personalized access to submission history and status updates.
• Real-Time Tracking: Progress information during the editorial process.
• Automated Documents: Generation of acceptance letters and copyright forms.
• Easy Downloads: Access to certificates and published papers through the system.

📋 Preparing an Industrial Chemistry Manuscript

A well-structured manuscript should explain the industrial or scientific problem, the method used, and the significance of the findings. Before submission, authors may check the following:

• Define the research objective and explain its relevance to industrial chemistry.
• Describe chemicals, raw materials, equipment, reaction conditions, and experimental procedures.
• Report relevant yield, purity, selectivity, characterization, and analytical results.
• Include suitable controls, replicates, uncertainty information, and statistical methods where applicable.
• Explain how process performance or product quality was evaluated.
• Discuss safety, waste, energy, or resource considerations when they are part of the study.
• State limitations and avoid conclusions beyond the evidence.
• Follow the journal’s current formatting, reference, ethics, and submission requirements.

✉️ Contact and Online Submission

For questions about manuscript suitability, author instructions, publication procedures, indexing information, or current fees, contact the journal directly.

Email: editorinchief@ijsreat.com

Submission Portal: IJSREAT Editorial Management System

🏭 Submit Your Industrial Chemistry Research

Researchers working on chemical process development, catalysts, polymers, industrial materials, quality analysis, or sustainable manufacturing can review IJSREAT’s current scope and author guidelines to determine whether their manuscript is appropriate. Confirm current publication policies, indexing details, review timelines, and charges before submission.

Submit Your Manuscript