Peer Reviewed Engineering Research Journal | IJSREAT

Researchers looking for a peer reviewed engineering research journal can explore the International Journal of Scientific Research in Engineering & Technology (IJSREAT). The journal describes itself as an international, bi-monthly, open-access, peer-reviewed publication covering research across Science, Engineering, and Technology. Its e-ISSN is 2583-1240.

IJSREAT states that it welcomes original research papers, review articles, and technical notes. Its multidisciplinary focus may be relevant to work connecting engineering with chemistry, materials science, environmental research, computational methods, and related technical fields. Authors should confirm that their manuscript matches the journal’s current scope and submission requirements.

🌐 About the International Journal of Scientific Research in Engineering & Technology

IJSREAT reports that it was established by academicians, educationists, engineers, and industry professionals to provide a platform for sharing research findings and technical developments. The journal describes its objectives as promoting original contributions, technological innovation, and advances across scientific and engineering disciplines.

A peer-reviewed engineering journal provides an editorial process for assessing submitted research. Authors can help reviewers understand their contribution by clearly presenting the research problem, methodology, results, limitations, and relevance to engineering practice or scientific knowledge.

⚙️ Engineering and Interdisciplinary Research Scope

The supplied IJSREAT information describes a broad scope across Science, Engineering, and Technology. It also identifies Chemistry, Applied Chemistry, Materials Science, Environmental Engineering, and related scientific areas. The examples below illustrate possible connections among these fields; authors should check current subject coverage before submission.

🔧 Engineering Research Areas

• Mechanical Engineering: Design, manufacturing, thermal systems, materials, and process optimization.
• Civil Engineering: Structural analysis, construction materials, geotechnical studies, and sustainable infrastructure.
• Electrical Engineering: Power systems, electrical machines, control systems, and energy applications.
• Electronics and Communication: Embedded systems, communication technologies, circuits, and signal processing.
• Computer Science: Algorithms, software systems, data analysis, computational modelling, and engineering applications.
• Environmental Engineering: Water and wastewater treatment, pollution monitoring, resource recovery, and sustainable processes.
• Materials Engineering: Composite materials, nanomaterials, polymers, ceramics, and material characterization.
• Chemical Engineering: Process development, reaction systems, separation methods, and industrial applications.

🧪 Chemistry and Materials Research for Engineering Applications

Chemistry research studies matter, its structure and properties, chemical reactions, and practical applications. In engineering research, chemistry can contribute to the development of materials, energy-storage systems, environmental treatment methods, sensors, and industrial processes.

🔬 Major Chemistry Research Areas

• Organic Chemistry: Organic synthesis, reaction mechanisms, medicinal chemistry, and natural products.
• Inorganic Chemistry: Coordination compounds, metal complexes, catalysts, and inorganic materials.
• Physical Chemistry: Chemical kinetics, thermodynamics, electrochemistry, and molecular spectroscopy.
• Analytical Chemistry: Chromatography, spectroscopy, chemical sensors, and analytical method development.
• Environmental Chemistry: Water pollution, air quality, soil contamination, waste treatment, and monitoring.
• Industrial Chemistry: Chemical manufacturing, process optimization, catalysts, and product development.
• Polymer Chemistry: Polymer synthesis, biodegradable plastics, nanocomposites, and advanced polymer materials.
• Materials Chemistry: Nanomaterials, semiconductors, ceramics, batteries, and functional materials.
• Green Chemistry: Sustainable synthesis, renewable feedstocks, waste reduction, and environmentally considerate processes.
• Medicinal Chemistry: Drug design, pharmaceutical compounds, molecular interactions, and chemical evaluation.
• Biochemistry: Enzymes, proteins, metabolic pathways, biomolecules, and biochemical analysis.
• Computational Chemistry: Molecular modelling, quantum chemistry, simulations, and AI-assisted research.
• Food Chemistry: Food composition, additives, quality analysis, preservation, and food safety.
• Agricultural Chemistry: Soil chemistry, fertilizers, pesticides, and sustainable agricultural applications.
• Electrochemistry: Batteries, fuel cells, corrosion studies, and energy-storage materials.

💡 Engineering Research Topics to Explore

The following examples connect engineering with chemistry, materials science, environmental research, and technology. They are illustrative research directions, not a guarantee that a particular manuscript will be accepted.

• Development and characterization of nanomaterials for industrial applications.
• Green synthesis of metal nanoparticles using plant extracts.
• Design and evaluation of biodegradable polymer composites.
• Electrochemical performance studies of advanced battery materials.
• Adsorption-based removal of heavy metals from wastewater.
• Development of chemical sensors for environmental monitoring.
• Computational modelling of molecular structures and material properties.
• Synthesis and characterization of metal complexes for catalytic applications.
• Photocatalytic degradation of organic pollutants.
• Development of sustainable materials for engineering applications.

💻 Computer Science and Engineering Research

Computer science can support engineering studies through simulation, data processing, optimization, scientific software, and computational analysis. Depending on the manuscript and the journal’s current scope, interdisciplinary research may examine machine-learning-assisted prediction, sensor-data analysis, computational chemistry, numerical modelling, or software tools for engineering workflows.

A strong interdisciplinary paper should explain the engineering or scientific problem, the role of computation, the methods used, and how the results were tested or validated. Authors whose work is primarily computer science-focused should confirm scope suitability with the editorial office.

📑 Peer Review and Fast Publication Process

IJSREAT describes an editorial workflow intended to provide responses during the submission process. The supplied information lists the following targets. Actual review times may vary depending on manuscript quality, reviewer availability, revisions, and editorial requirements.

1. Online Submission: Submit the manuscript through the editorial management system.
2. Initial Acknowledgement: The journal lists an acknowledgement target within 12 hours.
3. Expert Review: The supplied information describes a review target of approximately 2 days.
4. Editorial Decision: A decision target of within 3 days is stated; this does not guarantee acceptance.
5. Publication and Certificate: Accepted papers proceed through required publication steps, after which available paper and certificate files may be accessed.

Authors searching for fast publication or rapid publication should consider the full editorial process, including peer review and any required revisions. A short stated timeline does not replace the need to assess the journal’s policies and the suitability of the research.

🌍 Open Access and Publication Ethics

IJSREAT describes its publication model as open access, with published content available online to readers. The journal also reports plagiarism screening and editorial procedures intended to support publication integrity. Authors should consult the journal’s current policies for details about originality checks, authorship, conflicts of interest, corrections, and research ethics.

The supplied journal information states that IJSREAT follows COPE guidance. Authors can review the journal’s published ethics policies and the relevant COPE resources to understand the procedures that apply to their submission.

🔎 Indexing and Abstracting Information

The journal-provided information names the following platforms, directories, and services. Listing status and coverage may vary, so authors should verify current records directly with each service.

• Google Scholar
• Scribd and ISSUU
• Elsevier Mendeley
• EuroPub and DRJI
• Academic Keys and Edocr
• I2OR, PDFSR, and ResearchBIB
• SSRN and WorldCat
• Ex Libris and Thomson Reuters Research ID
• Semantic Scholar, Dimensions, and PlumX

Google Scholar discoverability does not establish UGC CARE listing or approval. If UGC CARE status is required for your academic or institutional purpose, verify the exact journal title and e-ISSN using official UGC information before submission.

💰 Article Processing Charges

According to the supplied IJSREAT information, article processing charges are payable after manuscript acceptance. The listed fees are shown below.

Confirm current fees, applicable taxes, DOI arrangements, and official payment instructions with the editorial office before making a payment. “Low cost” is a search phrase and is not a verified comparison with other journals.

🖥️ Online Editorial Management System

IJSREAT describes an editorial management system with tools intended to help authors manage their submissions and access relevant documents.

• Author Dashboard: View submission history and available status updates.
• Manuscript Tracking: Follow the paper through the editorial workflow.
• Document Access: Access acceptance-related and copyright documents when issued.
• Downloads: Retrieve available certificates and published papers through the system.

✍️ Manuscript Preparation Checklist

Before submitting to a peer reviewed engineering research journal, authors can review the following points to improve manuscript clarity and readiness.

• Use a title that accurately describes the research question and contribution.
• Explain the engineering problem and its scientific or practical relevance.
• Present the methodology, materials, instruments, datasets, and analysis clearly.
• Include results, limitations, and conclusions supported by the reported evidence.
• Use appropriate references and follow the journal’s current formatting instructions.
• Confirm authorship, permissions, ethical approvals, and data statements where applicable.
• Check the journal’s current subject scope and submission requirements.

❓ Frequently Asked Questions

What is a peer reviewed engineering research journal?

It is a scholarly publication that uses an editorial assessment and peer-review process to evaluate submitted engineering research. Review procedures differ among journals, so authors should consult the specific journal’s policies.

Does IJSREAT offer fast publication?

IJSREAT lists target acknowledgement, review, and decision timelines in its supplied information. These are targets rather than guaranteed dates. The actual process may depend on reviewer availability, revisions, and editorial assessment.

Is IJSREAT UGC CARE listed?

The supplied information does not establish current UGC CARE listing. Authors who require this status should verify the exact journal title and e-ISSN through official UGC information.

Does Google Scholar listing confirm UGC CARE status?

No. Google Scholar discoverability and UGC CARE listing are separate matters and should be checked through their respective sources.

What are the listed publication charges?

The supplied fee schedule lists ₹1,200 plus 18% GST for Indian authors without a DOI, ₹1,400 plus 18% GST with a DOI, and US $80 for authors outside India with a DOI. Confirm current charges with the journal before payment.

📩 Submit Your Engineering Research

Researchers planning to submit an original research paper, review article, or technical note can review the current author instructions and confirm scope, editorial timelines, and fees before proceeding.